📱 Installing your screen protector? Follow these simple steps for proper installation: clean your iPad screen, align the textured side with camera notches, and secure the edges for a perfect fit.
💡 Key installation tips:
Clean first: Use screen cleaning solution or 70% isopropyl alcohol
Textured side facing you: Ensure correct orientation
Camera alignment: Match notches with iPad camera - critical for proper fit
Secure edges: Run finger along all edges to ensure adhesion
Installation Process
🧽 Step 1: Clean Your iPad Screen
Prepare your iPad for installation:
Cleaning solution: Use screen cleaning solution or 70% isopropyl alcohol
Thorough cleaning: Remove all dust, fingerprints, and debris
Dry completely: Ensure screen is completely dry before proceeding
💡 Pro tip: Clean installation surface prevents bubbles and ensures proper adhesion.
📐 Step 2: Align the Screen Protector
Position your screen protector correctly:
Check orientation:
Textured side: Ensure textured side of screen protector is facing you
Smooth side: Smooth side should face the iPad screen
Align carefully:
Edge alignment: Line up screen protector edges with iPad edges
Camera notches: Match screen protector camera cutouts with iPad camera
Critical check: Ensure camera is not covered by the protector
⚠️ Important: You'll know if the screen protector is facing the wrong way if the camera notch doesn't align properly!
🤏 Step 3: Secure the Screen Protector
Complete the installation:
Edge securing: Run a finger along each edge of the iPad
Full adhesion: Ensure screen protector is fully secured to iPad surface
Check corners: Pay special attention to corner areas
Smooth out bubbles: Work out any air bubbles from center to edges
Troubleshooting
🔧 Common Installation Issues
Camera alignment problems:
Double-check orientation: Ensure textured side is facing you
Reposition carefully: Lift and realign if camera notches don't match
Clean again: Remove and clean both surfaces if repositioning multiple times
Air bubbles:
Work from center: Push bubbles toward edges
Use credit card: Smooth tool can help eliminate stubborn bubbles
Take your time: Slow, steady pressure works best
Edge lifting:
Press firmly: Run finger along edges with firm pressure
Clean edges: Ensure no dust or debris preventing adhesion
Check alignment: Misaligned protectors may not adhere properly
Quality Check
✅ Installation Verification
After installation, verify:
Camera access: Camera cutouts perfectly align with iPad camera
Edge adhesion: All edges are firmly secured
No bubbles: Screen is smooth without air pockets
Full coverage: Screen protector covers entire display area
Touch sensitivity: Screen responds normally to touch
Care Instructions
🛡️ Maintaining Your Screen Protector
Daily care:
Gentle cleaning: Use microfiber cloth for regular cleaning
Avoid harsh chemicals: Stick to screen-safe cleaning solutions
Protect edges: Be careful not to catch or lift edges during use
💡 Pro tip: Proper installation is key to long-lasting protection and optimal touch sensitivity.